Overview

  • 2.0 lb/ft3 nominal density, closed cell insulation, air and vapour barrier material
  • Insulates, air seals, and provides vapour barrier at the same time – offering a superior solution to your buildings envelope needs
  • Results in superior quality construction process
  • 2 lb spray foam is an envelope system (not just insulation)
  • Experience higher comfort levels and lower heating and cooling costs

INSTALLATION

2 lb spray foam is applied by spraying pressurized, heated, and mixed liquid components onto a suitable construction surface. It expands in seconds to form a solid barrier including millions of tiny closed cells, filling cavities and sealing cracks and crevices. It adheres to most surfaces. Winter application may require heat. Some preparatory work may be required.

WATER VAPOR PERMEANCE

2 lb is an approved vapour barrier product, which reduces the amount of moisture that can diffuse through the insulation. Jurisdictional requirements may require poly to specific structural components that cannot be sprayed. For a complete technical data specification sheet of our products please contact us.

View PDF

Overview

  • High expansion, 100% water-blown polyurethane spray foam for air-sealing and insulating buildings
  • Insulates and air seals using only one product for maximum energy savings while minimizing environmental impact
  • Significantly reduces air leakage, contributes to a healthier, quieter and more comfortable indoor environment, while reducing energy consumption and related greenhouse gas emissions by as much as 50%
  • Is an effective vapour permeable air barrier material that remains flexible.

INSTALLATION

1/2 lb is applied by spraying pressurized, heated, and mixed liquid components onto a suitable construction surface. It then expands approximately 100:1 in seconds to provide a flexible foam blanket of millions of tiny air cells, filling building cavities, cracks and crevices in the process. It adheres to most construction materials, insulating and sealing out air infiltration.

WATER VAPOR PERMEANCE

1/2 lb is water vapour permeable which allows moisture to diffuse through the insulation in Edmonton climates and dissipate from the building envelope. For a complete technical data specifications sheet of our products please contact us.

Inquire about our services

Contact Us

Spray foam in Edmonton and the surrounding area can have huge benefits to your overall building performance. Due to our unique climate moisture management is critical.  Huge temperature swings can be problematic for most insulation systems.  Spray foam’s unique spray on characteristics and sealing abilities makes for a far superior choice for demanding climates.  It will meet and exceed expectations for air tightness and climate control. Also the tiny holes in your building structure are an open invitation to ants, bugs, and small rodents. Fortunately, the small cracks and crevices can be filled with spray foam. spray foam insulation doesn’t sag or break over extended periods of time, it lasts longer. Fiberglass insulation is significantly cheaper than spray foam insulation, but it is also less effective, especially in extremely cold conditions.

Traditional insulation such as fiberglass batt are factory made and factory tested.  When it’s installed in your home it often does not perform the exact same way.  Spray foam is made on site and will be sprayed into to your wall and tested for adhesion filling the entire cavity. Fiberglass insulation properties are provided by air between the fibers.  The insulating ability will diminish when the fibers fill with cool air which will severely impact performance.  Because spray foams are air barriers it resists air flow which will make it less susceptible to this problem. Fiberglass insulation is significantly cheaper than spray foam insulation, but it is also less effective, especially in extremely cold conditions.

Often not a simple question to answer.  There are many factors we like to consider before being able to offer a price.  The material, equipment and highly trained installers all add up rather quickly.  Rarely are two jobs exactly alike so we like to get into the details and calculate our best price after we understand the factors.  Not always can we simply offer a square footage price that can fit all situations.  Please contact us to receive a free quote!

Don’t wait.  Let’s get started on planning your spray foam job.  Simply call or use our convenient contact form to get your free, no commitment estimate.

Yes!  They do change regularly so do not wait.  Contact us for your free consultation.  We’d be glad to help you!